pulsarbat.FractionalPhase

class pulsarbat.FractionalPhase(angle, unit=None, wrap_angle=None, **kwargs)

Phase without the cycle count, i.e., with a range of 1 cycle.

This subclass of ~astropy.coordinates.Longitude differs from it mostly in being able to take the fractional part of any ~baseband_tasks.phases.Phase input.

Parameters:

anglearray, list, scalar, ~astropy.units.Quantity,

Angle The angle value(s). If a tuple, will be interpreted as (h, m s) or (d, m, s) depending on unit. If a string, it will be interpreted following the rules described for Angle.

unitUnitBase, str, optional

The unit of the value specified for the angle. This may be any string that ~astropy.units.Unit understands. Must be an angular unit. Default is ‘cycle’.

wrap_angleAngle or equivalent, optional

Angle at which to wrap back to wrap_angle - 1 cycle. If None (default), it will be taken to be 0.5 cycle unless angle has a wrap_angle attribute.

Raises:

~astropy.units.UnitsError

If a unit is not provided or it is not an angular unit.

TypeError

If the angle parameter is a Latitude.

__init__(*args, **kwargs)

Methods

__init__(*args, **kwargs)
all([axis, out, keepdims, where])	Returns True if all elements evaluate to True.
any([axis, out, keepdims, where])	Returns True if any of the elements of a evaluate to True.
argmax([axis, out, keepdims])	Return indices of the maximum values along the given axis.
argmin([axis, out, keepdims])	Return indices of the minimum values along the given axis.
argpartition(kth[, axis, kind, order])	Returns the indices that would partition this array.
argsort([axis, kind, order])	Returns the indices that would sort this array.
astype(dtype[, order, casting, subok, copy])	Copy of the array, cast to a specified type.
byteswap([inplace])	Swap the bytes of the array elements
choose(choices[, out, mode])	Use an index array to construct a new array from a set of choices.
clip([min, max, out])	Return an array whose values are limited to [min, max].
compress(condition[, axis, out])	Return selected slices of this array along given axis.
conj()	Complex-conjugate all elements.
conjugate()	Return the complex conjugate, element-wise.
copy([order])	Return a copy of the array.
cumprod([axis, dtype, out])	Return the cumulative product of the elements along the given axis.
cumsum([axis, dtype, out])	Return the cumulative sum of the elements along the given axis.
decompose([bases])	Generates a new Quantity with the units decomposed.
diagonal([offset, axis1, axis2])	Return specified diagonals.
diff([n, axis])
dot(b[, out])
dump(file)	Not implemented, use .value.dump() instead.
dumps()	Not implemented, use .value.dumps() instead.
ediff1d([to_end, to_begin])
fill(value)	Fill the array with a scalar value.
flatten([order])	Return a copy of the array collapsed into one dimension.
getfield(dtype[, offset])	Returns a field of the given array as a certain type.
insert(obj, values[, axis])	Insert values along the given axis before the given indices and return a new ~astropy.units.Quantity object.
is_within_bounds([lower, upper])	Check if all angle(s) satisfy lower <= angle < upper.
item(*args)	Copy an element of an array to a scalar Quantity and return it.
itemset(*args)	Insert scalar into an array (scalar is cast to array's dtype, if possible)
max([axis, out, keepdims, initial, where])	Return the maximum along a given axis.
mean([axis, dtype, out, keepdims, where])	Returns the average of the array elements along given axis.
min([axis, out, keepdims, initial, where])	Return the minimum along a given axis.
nansum([axis, out, keepdims, initial, where])	Deprecated since version 5.3.
newbyteorder([new_order])	Return the array with the same data viewed with a different byte order.
nonzero()	Return the indices of the elements that are non-zero.
partition(kth[, axis, kind, order])	Rearranges the elements in the array in such a way that the value of the element in kth position is in the position it would be in a sorted array.
prod([axis, dtype, out, keepdims, initial, ...])	Return the product of the array elements over the given axis
ptp([axis, out, keepdims])	Peak to peak (maximum - minimum) value along a given axis.
put(indices, values[, mode])	Set a.flat[n] = values[n] for all n in indices.
ravel([order])	Return a flattened array.
repeat(repeats[, axis])	Repeat elements of an array.
reshape(shape[, order])	Returns an array containing the same data with a new shape.
resize(new_shape[, refcheck])	Change shape and size of array in-place.
round([decimals, out])	Return a with each element rounded to the given number of decimals.
searchsorted(v[, side, sorter])	Find indices where elements of v should be inserted in a to maintain order.
setfield(val, dtype[, offset])	Put a value into a specified place in a field defined by a data-type.
setflags([write, align, uic])	Set array flags WRITEABLE, ALIGNED, WRITEBACKIFCOPY, respectively.
sort([axis, kind, order])	Sort an array in-place.
squeeze([axis])	Remove axes of length one from a.
std([axis, dtype, out, ddof, keepdims, where])	Returns the standard deviation of the array elements along given axis.
sum([axis, dtype, out, keepdims, initial, where])	Return the sum of the array elements over the given axis.
swapaxes(axis1, axis2)	Return a view of the array with axis1 and axis2 interchanged.
take(indices[, axis, out, mode])	Return an array formed from the elements of a at the given indices.
to(unit[, equivalencies, copy])	Return a new ~astropy.units.Quantity object with the specified unit.
to_string([unit, decimal, sep, precision, ...])	A string representation of the angle.
to_value([unit, equivalencies])	The numerical value, possibly in a different unit.
tobytes([order])	Not implemented, use .value.tobytes() instead.
tofile(fid[, sep, format])	Not implemented, use .value.tofile() instead.
tolist()	Return the array as an a.ndim-levels deep nested list of Python scalars.
tostring([order])	Not implemented, use .value.tostring() instead.
trace([offset, axis1, axis2, dtype, out])	Return the sum along diagonals of the array.
transpose(*axes)	Returns a view of the array with axes transposed.
var([axis, dtype, out, ddof, keepdims, where])	Returns the variance of the array elements, along given axis.
view([dtype][, type])	New view of array with the same data.
wrap_at(wrap_angle[, inplace])	Wrap the ~astropy.coordinates.Angle object at the given wrap_angle.

Attributes

T	View of the transposed array.
base	Base object if memory is from some other object.
cgs	Returns a copy of the current Quantity instance with CGS units.
ctypes	An object to simplify the interaction of the array with the ctypes module.
data	Python buffer object pointing to the start of the array's data.
dms	The angle's value in degrees, as a (d, m, s) named tuple.
dtype	Data-type of the array's elements.
equivalencies	A list of equivalencies that will be applied by default during unit conversions.
flags	Information about the memory layout of the array.
flat	A 1-D iterator over the Quantity array.
hms	The angle's value in hours, as a named tuple with (h, m, s) members.
hour	The angle's value in hours (read-only property).
imag	The imaginary part of the array.
info
isscalar	True if the value of this quantity is a scalar, or False if it is an array-like object.
itemsize	Length of one array element in bytes.
nbytes	Total bytes consumed by the elements of the array.
ndim	Number of array dimensions.
real	The real part of the array.
shape	Tuple of array dimensions.
si	Returns a copy of the current Quantity instance with SI units.
signed_dms	The angle's value in degrees, as a (sign, d, m, s) named tuple.
size	Number of elements in the array.
strides	Tuple of bytes to step in each dimension when traversing an array.
unit	A ~astropy.units.UnitBase object representing the unit of this quantity.
value	The numerical value of this instance.
wrap_angle